DS200DCFBG1BKC上有五個單獨的電路。這些電路包括控制級電源電路、驅動電路、電機磁場電源電路以及交流和直流監測電路。驅動器上保險絲的診斷信息通過兩個LED指示燈和一個霓虹燈指示燈呈現給用戶。電路板中集成了三個保護保險絲，保護電流不受干擾。當使用卡上的五個測試點之一時，檢查板中的電壓水平很簡單。為用戶提供了許多可配置的設置，以適應特定工作的需要。電路板上的12個跳線和7個DIP開關可根據用戶要求進行配置。
電路板和驅動器包含通用電氣概述的應遵循的安裝參數。這些指南將保護整個裝置免受任何意外損壞。有關接線和安裝板的完整指南，請參考設備的數據表和手冊。Mark V系列的成員由其原始制造商通用電氣提供技術支持。
The General Electric DS200DCFBG1BKC is a Mark V series power supply board. When installed in a drive, this board provides electricity to the enclosure fan as well as the system’s control level power. Of GE’s drive systems, this board is compatible with the DC2000, AC2000, FC2000, CB2000, and ME2000 series of drives. Nominally rated sourced inputs to the board can safely measure between 38 and 115VAC. Outputted frequencies generated by the card can measure anywhere from 0 and 500 kHz, depending on the inputted voltages.Five individual circuitries are found on DS200DCFBG1BKC. These include a control level supply circuit, a driver circuit, a motor field power circuit, and both an AC and DC monitoring circuit. Diagnostic information for the fuses on the drive is presented to the user via the two LED indicators and the one neon indicator. Three protective fuses are integrated into the board, protecting the currents from interruptions. Checking voltage levels in the board is simple when using one of the five test points found on the card. Users are provided a number of configurable settings to adjust to job specific needs. Twelve jumpers and seven DIP switches on the board can be configured to fit user requirements.
Boards and drives contain installation parameters outlined by General Electric that should be followed. These guidelines will protect the entire unit from any accidental damages. Please reference the device’s datasheet and manual for a complete guide to wiring and installing the board. Members of the Mark V series were provided technical support by their original manufacturer, General Electric.
客服1